Shenzhen Viyork Technology Co., LTD
Shenzhen Viyork technology co., LTD We will focus more for your attention!
Add to Cart
Yaskawa SGDG-01GTY21 100W SERVO DRIVE 2AMP 90-253VAC 50/60HZ 1PH NEW
Quick Details:
200V 3P/1P 1.0kW
The SGDG Legend servo amplifier is a legacy product and no longer promoted in the Americas. The SGDG Legend was a single-phase or three-phase AC and DC input amplifier with 100% digital design, an intelligent serial coder and ethernet motion control functionality. Four amplifier sizes (100w - 1,500w) and 23 motor choices cover a wide range of needs.
Specifications
| Basic Specifications | Input Power Supply | Main Circuit | Single-phase: AC90 ~ 253VAC |
|---|---|---|---|
| Control Circuit | Single-phase AC 90 ~ 253VAC | ||
| Control Mode | Three-phase, full-wave rectification IGBT PWM (sinusoidal commutation) | ||
| Feedback | Serial incremental encoder | ||
| Location | Ambient2/Storage Temperature | 0 to 55ºC / -20 to 85ºC | |
| Ambient/Storage Humidity | 90% or less (non-condensing) | ||
| Vibration/Shock Resistance | 4.9m/s2/9.8m/s2 | ||
| Structure | Base mounted (duct ventilation available as option) and flat mount type | ||
| Torque Control Mode | Input Signal | Reference Voltage | 0 to ±10V at peak torque (forward rotation with positive reference). Resolution: 16-bit analog to digital conversion. |
| Input Impedance | Approximately 14kW | ||
| Circuit Time Constant | Approximately 47µs | ||
| I/O Signals | Position Output | Encoder Output Form | Phases A, B and C: Line driver output |
| Encoder Output | Choices: set with rotary switch: | ||
| Sequence Input | Servo ON, Dynamic Brake OFF3 w/choice of Photocoupler input 12V-24dc (primary) or 5 VDC TTL inputs (effective logic is “High”) | ||
| Monitors | Torque Monitor | 5V/Maximum torque or force | |
| Speed Monitor | 1V/1000rpm or 1000 mm/sec | ||
| Sequence Output | Servo run, alarm | ||
| Built-in Functions | Regenerative Processing | Incorporated | |
| Protection | Overcurrent, overload, regenerative error, main circuit voltage error, heat sink overheat, power open phase, overflow, overspeed, encoder error, encoder disconnected, overrun, CPU error, switch setting error, linear motor scale polarity error | ||
| LED and Alarm Output Display | POWER, CHARGE, one 7-segment LED display | ||
| Others | Automatic servomotor ID | ||
1 When 1kW and 1.5kW amps are used with single phase power input, the continuous power rating must be derated to 70%. Reference speed/torque curves for the selected motor for de-ratings.
2 Use the amplifier within the ambient temperature range. When enclosed, the temperatures inside the cabinet must not exceed the specified range.
3 Regarding: “DB (Dynamic Brake) OFF Function”.
(1) The dynamic brake function is always ON when the main power is not applied.
(2) The dynamic brake function is always ON when the logic control power is not applied.
(3) The dynamic brake state during SVOFF can be selected with SWI-1 (ON or OFF).
(4) When SVOFF or an alarm state occurs during move, the dynamic braking function can be enabled or disabled by the state of DBOFF input signal at the CNI connector.
WARNING! If the DB is disabled, the load will coast free.
MORE INFORMATION
DELIVERY
Logistic partners UPS, FedEx and DHL
International delivery available
Same day dispatch from group stock
WARRANTY
All parts new are covered by Shenzhen Viyork 12 month warranty
RETURNS
No hassle returns policy
Dedicated customer support team
PAYMENT
Trade credit
We understand that credit is a necessary part of business and offer credit agreements on request, subject to status.
Payment options
We accept Bank transfers and the following methods of payment:
Western Union PayPal VISA